Jiangsu Yongyu Auto Parts Co., Ltd.
Address: Yancheng Sheyang Bay Bay Road, No。 188
Contact: Xu Wenkai
E-mail: [email protected]
Zip code: 224000
Why clutch friction plate mounted on the driven plate
As we all know, the clutch friction plate is mounted on the driven plate above, but many people will ask: Why the friction plate is mounted on the driven plate above, there are many people will ask why the clutch friction plate is not installed in the clutch active On the pieces? Now by Ostar Driven disk manufacturing experts to answer this question for everyone:
Firstly, the kinetic energy is transmitted between the clutch driven disc and the driving disc through friction, the clutch friction disc is mounted on the driven disc, and the clutch pressing sheet is mounted on the driving member, and the pressing sheet generates friction with the friction sheet at the time of operation Force to drive the clutch driven disk work.
Secondly, if the friction plate is mounted on the drive plate, the power output of the engine can not be disconnected. Therefore, the clutch friction plate can only be installed on the driven plate to cut off the power output of the drive flywheel.
Thirdly, if the clutch friction plates are mounted on the driving part, the parts such as the pressure plate and the spring must be installed on the clutch driven plate, which will result in the inertia of the driven plate being increased due to the mass increase.
Finally, if the friction plate is mounted on the clutch drive, there is a lot of unnecessary hassle associated with subsequent repairs。